So the other day i was sitting around listening to "I" by Meshuggah when i realize, hey, they do a pretty good job with an 8 string guitar so maybe i should try it out. So now comes my question, does anyone know of a place to buy an 8 string guitar? Preferably 500-600 maybe 650. But, i started out as a bass player so i am a pretty big fan of the low end. I looked and MF and Music 123 and they seem to only have 7 strings so im not sure where else to look. The only problem is, i dont know if there will be any in my price range, but if you can, go for it. Thank you.

I'm pretty sure you have to get them custom made. so, that will be expensive.

__________________

Thats all I've ever seen too. Custom made 8 string guitars. I don't think there is a really big demand for anything more then 7 strings so good luck finding a stock made one.

__________________

http://www.hamerguitars.com/?fa=series&sid=201 <<< huh? huh? hehe naw...12 string bass...
I don't know anyone who makes 8-strings in mass production...check Ebay maybe...good luck

__________________

That would probably be only a custom made one, and it'll be much more than 500-600. Good luck.

__________________

Yesterday I ordered my new 8 string guitar from conklin. For that price range your are setting you will never find an 8 string guitar.... I looked too for cheaper guitars but didn't find any... so I went with custom made....

__________________

Damn What are the specs and how much did it cost if you don't mind me asking?

__________________

you should make one in shop class out of particle board and sheet rock
or like...a tissue box a paper towel roll and some rubber bands

__________________

lol 4200 dollars goddamn

__________________

The Bold parts is what I have chosen:

Body Style:
Sidewinder - NC
Crossover - NC
Custom Body Style - $ Contact us for quote

Body Construction:
Bolt On Neck - NC
Neck-Through-Body - $1000
Hollowbody - $1200

Please note that the Hollowbody construction is only available as a bolt-on neck.

Fret Number:
24 Frets - NC
28 Frets - $120
36 Frets - $200

Scale Length:
24 3/4" - NC
25" - NC
25 1/2" - NC
Multi-Scale / Fanned Frets (22 3/4" - 25 1/2") - $300
Multi-Scale / Fanned Frets (25" -27 3/4") - $300

Player Orientation:
Right Handed Instrument - NC
Left Handed Instrument - $100

Body Wood:
Alder - NC
Basswood - NC
Butternut - NC
Cherry - NC
Dragonwood - NC
Koa - $200
Mahogany - NC
Maple - NC
Poplar - NC
Spanish Cedar - NC
Swamp Ash - NC
Walnut - NC

Top Wood:
No Top - NC
Birdseye Maple - $300
Burl Maple - $400
Buckeye Burl - $500
Cocobolo - $300
Curly Maple - $300
Figured Bubinga - $400
Figured Cherry - $300
Figured Koa - $500
Figured Purpleheart - $300
Figured Redwood - $400
Figured Walnut - $500
Lacewood - $300
Quilt Maple - $400
Spalted Maple - $400
Wenge - $300
Zebrawood - $300
Ziricote - $400

Melted Top - $1200 (See Note)

If you are ordering a Melted Top, the price quoted is for standard 3 and 5 piece patterns. For a custom Melted Top (Existing special editions or new designs), please contact us with the idea for a quote.

Top/Body Options:
Show neck woods on neck-through-body - NC
Full width top on neck-through-body - $200
Flat top - NC
Carved top - $200
Wood pickguard (specify wood) - $300
3-D relief Carving - Please provide artwork for quote

Neck Woods:
Solid Maple (6 string guitars only) - NC
Maple/Purpleheart (Standard on all 7-9 string guitars) - NC
Maple/Bubinga - $200
Maple/Walnut - $200
Maple/Wenge - $200
Wenge/Bubinga - $400
Wenge/Purpleheart - $400
Yellowheart/Purpleheart - $400
Yellowheart/Wenge - $400
Zebrawood/Wenge - $400
Zebrawood/Purpleheart - $400

Fingerboard:
Birdseye Maple - $100
Bubinga - NC
Cocobolo - NC
East Indian Rosewood - NC
Figured Bubinga - $100
Gabon (Black) Ebony - $200
Macassar Ebony - $100
Pink Ivory (When available) - $300
Purpleheart - NC
Quartersawn Hard Maple - NC
Wenge - NC
Melted Fingerboard - $600 (See note below)

Exotic Wood Fingerboard Binding (specify wood) - $200

If you are ordering a Melted Fingerboard, the price quoted is for standard 3 and 5 piece patterns. For a custom Melted Fingerboard (Existing special editions or new designs), please contact us with the idea for a quote.

Inlays:
Conklin "off sides" dots - NC
Side dots only (no inlay on front of fingerboard) - NC
Centered and side dots - NC

For custom inlays - we'll require the design, material and location(s) for a quote.

Headstock:
No cap (Show neck woods) - NC
Headstock Cap (match top) - $100
Headstock Cap (match fingerboard) - $100
Melted Headstock Cap - $300

If you are ordering a Melted Headstock Cap, the price quoted is for standard 3 and 5 piece patterns. For a custom Melted Headstock Cap (Existing special editions or new designs), please contact us with the idea for a quote.

Pickups:
Conklin Custom pickups - NC
Seymour Duncan pickups (See note) - NC
DiMarzio pickups (See note) - NC
EMG pickups (See note) - NC

Conklin Custom pickups available for guitars with any number of strings. Please note that Seymour Duncan, DiMarzio and EMG pickups are available for 7 string guitars. Seymour Duncan "Custom Shop" pickups are available for 8 strings, but there may be an additional charge. Bartolini pickups are no longer available.

Electronics:
Active non-tone preamp gain boost - $100
Coil Tap Switch - $30
3-way Switch - $30
5-way Switch - $40

Options for knobs and layout will be discussed at time of order.

Piezos:
Piezos - $60 per saddle/string

MIDI Electronics(requires Piezos):
RMC Polydrive and 13 pin output - $400

Bridge:
Hipshot fixed bridge - NC
ABM Individual bridge/saddles - NC
Tune-o-matic style - NC (Not available for 8 or more strings)
Non-locking tremolo and Sperzel locking tuners - $250
Locking Floyd Rose-style tremolo and Sperzel locking tuners - $350

On guitars with 8 or more strings and fanned frets you are limited to having 8 individual bridge/saddles at no extra charge or having us hand-mill a custom bridge plate. There is a minimum $500 upcharge for a custom compensated hand-milled bridge. Custom tremolos have a minimum $1500 upcharge.

Tuners:
Gotoh - NC
Hipshot - NC
Schaller - NC
Sperzel - NC
Hipshot De-tuner - $100 per string

All tuners are standard.

Hardware Color:
Chrome - NC
Black - NC
Gold - NC
Satin Chrome - NC

All hardware colors are standard (when available).

Finish:
Polished clearcoat over natural wood - NC
Satin clearcoat over natural wood - NC

See-through Cellophane Stain (only on light colored woods):
- Ruby red - NC
- Sapphire blue - NC
- Emerald green - NC
- Amethyst purple - NC
- Black-cherry - $100
- Black-n-blue - $100
- Black-n-green - $100
- Black-n-purple - $100

Basic Opaque colors (Red, White, Black, Blue, Green, Purple) - NC
Sunburst (yellow, orange and red) - $200
Tobacco-burst (red, brown and black) - $200

For custom colors, metallics, custom mixes, Candies, metal flakes, Custom Airbrushing - please contact us with your idea for a quote.

--------------------------------

The price I dont want to state here

changes in the specs are made in the future during the building process

__________________

Cool guitar! 28 frets... wow! What does a melted fretboard and headstock look like?

Also I seen you got the tune-o-matic bridge but it said it was not available on 8 string models. I didn't know if you had noticed that or not.

__________________

thank you.... can't wait to get it!

the melted fretboard looks similiar to this http://www.conklinguitars.com/bizar...nedfretmelt8jpg

the tune o matic bridge was my mistake.... bolded the wrong thing....
Non-locking tremolo and Sperzel locking tuners
I guess that was my choice..... but have still much time to decide

what would you change with the specs?

__________________

Thats gonna be one bad ass intrument!

__________________

I think the woods and hardware are all great choices. The only thing I would suggest different would be the bridge. They say they would mill a custom trem bridge for $1500, but I know I would get a Kahler trem.

Kahler USA will also make you a custom bridge to spec if you ask them, but I have no ideal how much it would cost. I ( as well as many others ) consider Kahler to be the best trem bridges ever made.

Edit:That and I would get a Flying V body shape with everything black... so black, lol

__________________

haha alright..... I'll them that with the bridge,.....

thanx man!

__________________

i think 8 strings for a guitar (or more) is kind of rediculous. i mean, the 7 sting was cool, and a good idea, but, like zertonshfits once said, if you want to get that low of tunings, just quit and play bass. but then again , i do like meshuggah...

__________________

See, i do play bass and that is the thing, i want a guitar because i like the high end and the soloing capabilities n such (not to say you cant solo with a bass, i love primus) but i also love the bass so i want an instrument that covers a large spectrum. and there is no way i can get a custom, it took me about 8 months to get this $400 i have now man...i suppose i may just have to settle for a 7 or just wait till im gettin some more dinero and get an 8 then...thanks anyways guys

or i could go the custom route, i could make one...i mean i have the stuff to do it but...so my new question is, does anyone know where i could get 8 string guitar pickups/bridges/necks? I can do the body myself, i have access to a plotter (a huge printer to print the outline of the body i want) and i have access to the power tools necessary. But getting the other parts i need might be pretty expensive. Well, any help would be appreciated, thx

man ive always wondered how much fun a 24+ fret guitar could be

__________________

Buy a baritone guitar, and tune it down to F ( that's Meshuggah's lowest note on their 8 stringers ). It will feel like a standard six string guitar tuned down to A ( I've down this before, and it does indeed work ).

That is an alternative, altough you miss the high end for the soloing

__________________