- your source for Metal tabs
Home Forum What's New Submit a Tab FAQ Links Contact Us Link to Us

Go Back Forum > Musicians > Gear & Recording
User Name

Thread Tools
Old 2007-04-11, 12:47
Jopop's Avatar
Jopop Jopop is offline
Senior Metalhead
Join Date: Mar 2006
Location: Norway
Posts: 398
Ah, wait till joamdude gets a reply then.
Proud member of the "$20000 worth of pro gear but can't play worth shit" squad
Reply With Quote
Old 2007-04-25, 23:37
Bloodsoaked666's Avatar
Bloodsoaked666 Bloodsoaked666 is offline
Senior Metalhead
Join Date: Nov 2006
Posts: 165
I was surprized my Crate GX130C head did not have more Gain as well. The way people talk it should kill everything at alike 3 or 4, I have it on 10 and need an EQ pedal in the loop to boost it.

Maybe I was just expecting more!!!

Reply With Quote
Old 2007-04-26, 00:57
Sycophant's Avatar
Sycophant Sycophant is offline
Supreme Metalhead
Join Date: Jul 2006
Location: Netherworlds Of The Mind
Posts: 685
Send a message via AIM to Sycophant
I'm suprised too man, as similar as everyone says that head is to the VH140c, you should be fine with the gain at like 4 1/2 and find that everything over is too much. That's how it is on my VH140c anyway. Maybe something's up with it?
Reply With Quote
Old 2007-04-26, 01:41
Jopop's Avatar
Jopop Jopop is offline
Senior Metalhead
Join Date: Mar 2006
Location: Norway
Posts: 398
Dirty contacts? Bad guitar cable?
Proud member of the "$20000 worth of pro gear but can't play worth shit" squad
Reply With Quote
Old 2007-04-26, 01:53
Josh's Avatar
Josh Josh is offline
Join Date: Mar 2005
Location: Upstate NY, Utica/Rome area.
Posts: 81
Send a message via AIM to Josh
Mine doesn't have an overload of gain, but definitely has enough, more than I would use in a practical setting. Most of it find from 8-10 on the knob, and I usually run mine a hair over 9. I notice between 9 and 10 there is more of a noticeable increase in the gain as opposed to the increases between the other positions.

If its any help, these are my settings, on a fully functional (1988ish blue series) SS-140c through a 300w Ampeg SS-412 cab with whatever Celestions they came with (GT-12 75s?)

Channel 1 (Distortion): Gain 9 1/3, Bass 6 1/2, Mid 7, High 8
Channel 2 (Clean): Gain 4, Bass 6, Mids 7, High 8, bright switch off.

I apologize in advance if these settings sound like shit, but they're working well for me. I know nobody cares about the clean setting but I figured I'd include it anyway. If you roll back the mids to 4 or 5 and the high around 6 on Channel 1 it will give you more of a Dying Fetus/Suffocation tone.

If I could get something besides dial up, and had a working soundcard, I'd record a good sample and upload it. If you want to hear a really rough recording of it at a band practice, check out the link in my signature. Sounds better in person but u can hear it definitely does have distortion.
Reply With Quote
Old 2007-04-26, 06:35
JOAMdude's Avatar
JOAMdude JOAMdude is offline
Join Date: Mar 2006
Location: Candyland
Posts: 1,542
well ihave the schematics and will just take it to a repairstore in boston
just waiting for an email response from them
Reply With Quote
Old 2008-04-21, 20:13
Drill-Head Drill-Head is offline
New Blood
Join Date: Apr 2008
Posts: 2
My Ampeg SS140C

Hey folks. I'm searching for manuals for my SS140C. I found this thread and had to post...

Your 1988ish Blueline amp obviously has a problem. It should get plenty gain and I have had mine for almost 20 years and I've never had to run it over 5 on the dirty channel (A). It's a little fuzzy at low volumes but... Lack of gain should not be a problem with this amp. First take it to someone who is insured and get it fixed right. The clean channel is not great but decent, the chorus and reverb help but it never has really had me saying "YES that is the clean sound I want", I'm satisfied but not real impressed with the clean sound.

The amp by itself is a little thin on the tone so I bought myself a bass EQ pedal for some extra control on the low end through the front effects loop. I have been running this through a Holmes 4x12 cab with 2 different wiring configs. Mostly with the speakers in the cab wired in series parrallel to get 8 ohms. Straight out of 1 jack on the dry side (I have never really used the chorus much). It sounds good like this but I added a Marshall 4x12 a while back and the difference with it running stereo made me tear up and thank God I bought this amp (the chorus was great too).

Recently I rewired my cabinet. Since I'm not running the full stack any more (sold my Marshall to buy a PA) I disconnected the through jack on the cab and rewired it as a second input. I'm now running 2 of the 4 speakers on each channel at 4 ohms per side. This Amp still sounds awesome after nearly 20 years and the chorus sounds like chorus instead of an old broken tremolo effect. Not the best chorus but decent.

I also ported my Holmes cab to let it throw a little air and man this rig has a serious bottom end when I want it. It has the best sounding crunch I've ever heard in a solid state amp. The lows thump hard. I had to laugh a little when I pulled up a slip of paper that was in the back of the head with my settings written on it (from around when I first bought it). The settings I'm using on the amp and the Bass EQ are still the exact same after all these years.

Now I'm kind of a simple guy so I like simple but top of the line sound, this amp has it, it just needs a little coaxing to get it out. I play all original stuff but we range from death metal to popcore stuff with everything in between and I'm a big fan of heavy, crunchy guitars (I'm 36). I've watched the guys and gals I've played with over the years go through amp after amp after preamp after effects processor and on and on and I've never heard anything that made me even think about replacing my blue baby. That said, I did play with 2 other people over the years who had similar amps. A girl I jammed with had the newer version of the SS140C and a guy I jammed with bought an SS150 because he loved my amp so much. Neither of them could get the same sound that I get. We even tried the Bass EQ through their rigs and they just didn't have the bawls mine does. way more fuzz and way less bottom. I have no idea why??? (I suspect unspecified design changes???)

Be patient and make sure you get it fixed right and if it's one of the good ones you should be able to make it rip the flesh right off of whoever you aim it at (heheheh). Just don't crank it to 11 (and these amps really do go to 11, count the dots, there are no numbers just 11 dots). My Bass EQ adds a liitle gain so it boosts the volume a bit but I have never had to turn it up past 5.5. I'm afraid I would blow the windows out of where ever I may be and maybe the neighbors too.

Good luck!
Reply With Quote
Old 2010-12-30, 18:54
LeftCoast LeftCoast is offline
New Blood
Join Date: Dec 2010
Posts: 1
Hey guys...

Hey - I know this is an old, dead thread, but I am hoping some of you are still active on here and can help me out. My SS-140 is starting to get a strange channel bleed and I want to take it to my repair guy. Do any of you still have the schematic and if so, is it possible to get it emailed to me? Thanks so much in advance!
Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Forum Jump

All times are GMT -5. The time now is 19:03.


Contact Us | Privacy Policy | Disclaimer
Copyright © 2001-2009 All Rights Reserved.
Powered by vBulletin
Copyright ©2000 - 2009, Jelsoft Enterprises Ltd.