View Single Post
  #15  
Old 2007-09-16, 18:37
Soulinsane's Avatar
Soulinsane Soulinsane is offline
Pirate Lawd
 
Join Date: May 2004
Location: Hanger 18
Posts: 6,520
No glue, but you will have to do some disassembling to install a new string hook. It sounds harder than what it really is.

Remove the strings and kahler bridge from the guitar ( four wood screws ).

On the bottom of the bridge there will be three screws that remove the string block assembly. Remove those screws.

You will notice that the string block simple holds the string hooks between itself and the cam. Once the string block is removed the sting hooks can be removed or replaced very easy.

Replace the string hook and reattach the string block assembly to the cam. The screws should only be hand tight. Don't over torque or you will strip the screws.

Once reassembled. Reattach the bridge to the guitar and sting it up. The setup will not have changed
__________________
Authorized Mercury Magnetics tech/dealer
Reply With Quote