Warmoth
 

Im not sure,does anyone know if Warmoth make neck's,with All Access neck joints(AANJ)?

those assholes live by me and won't let me come in and get something for like 2 bucks...

I would bet they do, like an Ibanez neck? I need a AANJ washer for my Ibanez RG, I lost one. Anyone got a spare to sell me?

http://cgi.ebay.com/Real-Ibanez-S-N...1QQcmdZViewItem
http://cgi.ebay.com/Real-Ibanez-RG-...1QQcmdZViewItem
http://cgi.ebay.com/Genuine-Ibanez-...1QQcmdZViewItem

might be a bit pricey tho, check out your local hardware shop aswell tho

what is so special about those screws and washers?

Yeah,A new neck for a guitar im putting together.I want either a Wizard one Ibanez neck,a prestige Ibanez neck,or Im trying to get a custom one.

if you wanna get a aanj warmoth neck, wait a while. i read somewhere on project guitar, that warmoth are developing and working on super thin aanj type necks. well something like that, search around project guitar for the proper article/email.

how much you prepared to spend on a neck?
btw, what body u using for your project?

Hey! Thanks! Those are kinda pricey. I just need one of the washers. I checked my local hardware store, they didn't have anything like it. Those damn things are unique. I'll see if I can snake one off e-bay.

A mahogany,6 string,rg shaped body,natural fininsh,PAFpro and Evo being installed ATM,dunno what the bridge situation is,I want a hardtail,non trem bridge.Maybe Wilkinson or Shaller.Do you know of any other neck builders?Or any suppliers of Ibanez necks?

Seems they dont make any,or wont,AANJ's.Only strat replacements.

You can get a neck without the screwholes and then drill them and reshape the heel for AANJ yourself. They wont make 24 fretters without fretboard overhang though and that sucks.

I think the best thing you could do is just to look around for a wizard neck on ebay.

Good idea,but I would rather not chance my skills on a brand new warmoth neck.



Sounds like an idea,Ive been keeping an eye out.Also searching for where an Ibanez supplier is that stocks replacement necks.

.
 

im a little confused. what exatly is an all access neck joint? what does it do? :)

It holds the neck onto the guitar.Its a alternative to the standard strat neck joints.It gives you better access to higher frets because it has a less bulky heel joint.

this is an all access neck joint, it gives you better access to the higher frets than other bolt ons

http://www.jemsite.com/jem/detail/f_njaa3.jpg

The overhang for the replacement 24 fret necks is so that the scale length is still correct. If you made the actual neck a little longer so there wasn't anymore fretboard overhang, the scale length wouldn't be 24.75" (or whatever it is), anymore, which'd cause you problems with intonation all over the place :)

i think i get it . thinner right?